Product Description

Stereolithography (SLA or SL; also known as stereolithography apparatus, optical fabrication, photo-solidification, or resin printing) is a form of 3D Printing technology used for creating models, Prototypes, Patterns, and production of parts in a layer by layer fashion using Photopolymerization, a process by which light causes chains of molecules to link, forming polymers. Those polymers then make up the body of a three-dimensional solid.

SLA printing is an early and widely used 3D printing technology.

Product Features

If a good surface finish is necessary, you must orient the part so that the surface material does not touch the part. This is typically done by placing it face-up on the supports.
Supported walls will reduce chance of warping and should be a minimum of .4 mm thick.
Unsupported walls have a higher chance of warping or detaching from the print and should be at least .6 mm thick.
Any recessed or imprinted features may fuse with the rest of the model and become invisible if they are too small. To prevent this:
- Embossed details must be at least .1 mm above the surface of the print.
- Engraved details must be at least .4 mm wide and .4 mm thick.
Holes in the x, y, and z axes that are less than .5 mm in diameter may close off during printing.
Always allow .5mm clearance between moving parts, and a .2mm clearance for assembly connections.
Reduce your print time and materials by hollowing your model. The walls should be at least 2 mm thick so the walls don’t fail during printing.

PLEASE CONTACT FOR PRICE RELATED QUERIES AND PLACING ORDERS AT:

MINDWARE
S -4, Plot No-7, Pocket-7, Pankaj Plaza,
Near Metro Station, Sector-12,
Dwarka, New Delhi-110078, (India)

+91-11-46102688 DIRECT LINE
Phones: +91-11-28032434, +91-11-46102688, +91-9810822688, +91-9717122688
Email: gm@indianbarcode.com